Friday, May 24, 2019

Friday May 24, 2019 -- WooHooo last day... small tears...

Key Things To Do Today:

Class Photos:
https://drive.google.com/open?id=1uueheR7f1S9jMkl6xyoHu9GXOOV35Szz

Your Docs and Stuff:
  1. Think about what you have on your MetroEd Google Drive
  2. How are you going to get access after you loose your @metroed email?
  3. Copy stuff you want to your personal Google drive, or download to a USB drive
 Bins:
  1.  Check with me that you have your Arduino, Bread board , Raspberry Pi, SD card and Safety glasses checked in
  2. Sort out all the jumper wires in your box
  3. Check all LEDs and put good ones in my bin, throw away all bad ones
  4. Sort any resistors, and put them in the right drawer... Use color code AND DMM to test them
  5. Any stuff you think I will want back, like Motors and stuff , bring it over... I'll tell you...
  6. Keep or recycle every thing else...
  7. Give me back an empty bin - Leave your name on it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Contact Me
https://sites.google.com/view/steam-clown-mechatronics/home/contact?authuser=0
 
8 Bit Computer

Thursday, May 23, 2019

Thursday, May 23, 2019 - Survey

Key Things To Do Today:

Take This Survey:
bit.ly/2018-SVCTE

Your Docs and Stuff:
  1. Think about what you have on your MetroEd Google Drive
  2. How are you going to get access after you loose your @metroed email?
  3. Copy stuff you want to your personal Google drive, or download to a USB drive
 Bins:
  1.  Check with me that you have your Arduino, Bread board , Raspberry Pi, SD card and Safety glasses checked in
  2. Sort out all the jumper wires in your box
  3. Check all LEDs and put good ones in my bin, throw away all bad ones
  4. Sort any resistors, and put them in the right drawer... Use color code AND DMM to test them
  5. Any stuff you think I will want back, like Motors and stuff , bring it over... I'll tell you...
  6. Keep or recycle every thing else...
  7. Give me back an empty bin - Leave your name on it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Contact Me
https://sites.google.com/view/steam-clown-mechatronics/home/contact?authuser=0
 
8 Bit Computer

Wednesday, May 22, 2019

Wednesday May 22, 2019 - Woot.... 3 days left...

Key Things To Do Today:

Your Docs and Stuff:
  1. Think about what you have on your MetroEd Google Drive
  2. How are you going to get access after you loose your @metroed email?
  3. Copy stuff you want to your personal Google drive, or download to a USB drive
 Bins:
  1.  Check with me that you have your Arduino, Bread board , Raspberry Pi, SD card and Safety glasses checked in
  2. Sort out all the jumper wires in your box
  3. Check all LEDs and put good ones in my bin, throw away all bad ones
  4. Sort any resistors, and put them in the right drawer... Use color code AND DMM to test them
  5. Any stuff you think I will want back, like Motors and stuff , bring it over... I'll tell you...
  6. Keep or recycle every thing else...
  7. Give me back an empty bin - Leave your name on it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Contact Me
https://sites.google.com/view/steam-clown-mechatronics/home/contact?authuser=0
 
8 Bit Computer

Friday, May 17, 2019

Friday May 17, 2019 - Maker Faire

    Cobham Internships
Autonomous Vehicle Conference - June

Bluetooth 5 IoT design contest: 'Make with Mesh'. from Cypress
     
     
    FLIP GRID - Due Go to  https://flipgrid.com/9de28c8c and answer the following questions.  You will be put into teams of 2-3 and you will have to answer all 3 questions... but each team member will be responsible for one question.  These will be assigned at random... so all team members will need to be able to answer any of the questions. Give a solid 90 sec in depth explanation.  Then if we think you need to redo it, we will have your team re-answer, but we will reassign randomly a different question.  So  make sure you take your time to do a good job. 
    1) How does the SR latch work using the 2 NOR gate?
    2) How is the D Latch different than the SR latch?
    3) What is the different and how does the D Flip Flop work
    4) How does the Register Transfer work?



    Mechatronics Engineering Plan For Today:
    • 8 Bit Computer
    • Open Lab If You have got approval from Jim and Randy
    • Clean Up




Ben Eaters 8 Bit Computer 

David Deutsch - link about binary and place value in prep for ALU
 
New Form -  Fill out at the end of the day

Open LAB  and/or Robot Club 
  • LAB - Duration: 30 Min
  • Link: Robot Club Google Sites
  • Instructions & Expectations: Connect with your Robot Club Team.  You will either be working on your Robot Project or an Open Lab Project.  
    • You will need to account for your time. You will need to convince me by your form submission that you worked given the time allotted. 
    • If  you or your Robot Club Team worked on the Robot Club project, you will make sure your Robot Project Status Google docs are updated.  
    • If you worked on an Open Lab Project, you will also need to tell me about what you accomplished and what you are planning next.
  • How to Submit Assignment:   Each Student needs to account for your time.  
  • Dig Deeper: Open Lab:
Clean Up
  • Assignment - Duration: 2-10 Min
  • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
  • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Thursday, May 16, 2019

Thursday May 16, 2019 - Cobham Internship

    Cobham Internships
    FLIP GRID - Due Go to  https://flipgrid.com/9de28c8c and answer the following questions.  You will be put into teams of 2-3 and you will have to answer all 3 questions... but each team member will be responsible for one question.  These will be assigned at random... so all team members will need to be able to answer any of the questions. Give a solid 90 sec in depth explanation.  Then if we think you need to redo it, we will have your team re-answer, but we will reassign randomly a different question.  So  make sure you take your time to do a good job. 
    1) How does the SR latch work using the 2 NOR gate?
    2) How is the D Latch different than the SR latch?
    3) What is the different and how does the D Flip Flop work
    4) How does the Register Transfer work?



    Mechatronics Engineering Plan For Today:
    • 8 Bit Computer
    • Open Lab If You have got approval from Jim and Randy
    • Clean Up




Ben Eaters 8 Bit Computer 

David Deutsch - link about binary and place value in prep for ALU
 
New Form -  Fill out at the end of the day

Open LAB  and/or Robot Club 
  • LAB - Duration: 30 Min
  • Link: Robot Club Google Sites
  • Instructions & Expectations: Connect with your Robot Club Team.  You will either be working on your Robot Project or an Open Lab Project.  
    • You will need to account for your time. You will need to convince me by your form submission that you worked given the time allotted. 
    • If  you or your Robot Club Team worked on the Robot Club project, you will make sure your Robot Project Status Google docs are updated.  
    • If you worked on an Open Lab Project, you will also need to tell me about what you accomplished and what you are planning next.
  • How to Submit Assignment:   Each Student needs to account for your time.  
  • Dig Deeper: Open Lab:
Clean Up
  • Assignment - Duration: 2-10 Min
  • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
  • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points