Friday August 31, 2018, - SVCTE Rally, Arduino C++ Introduction

Special Instructions: Be ready to walk over to the Auditorium at 7:40

---

Entry Ticket - Did You Get an Email From Cisco?

• Find it and Sign in.  You will need to set a password

---

Mechatronics Class Adgenda: Entry Ticket  SVCTE Assemblie Presentations Open Lab Clean Up

---

SVCTE Assemblie - Learn More About SVCTE Resources

• Instructions & Expectations: We are heading over to the Auditorium... be good , and pay attention.

Presentation Time

• Instructions & Expectations: One at a time we are going to hear your presentation and then give feedback 
• Presentation Evaluation Form (PDF)

Solder Lab (finish your 5-6 solder end 2 end joints)

• Assignment - Duration: 15 Min
• Link: TBD
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed
• Dig Deeper
• https://www.youtube.com/watch?v=Qps9woUGkvI
• https://www.youtube.com/watch?v=BLfXXRfRIzY
• https://www.youtube.com/watch?v=Q9G9gaokqvM

Open Lab

• Do Some Thing Cool

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Thursday August 30, 2018 - Presentations, Photos, and Algorithms

Special Instructions

---

Entry Ticket - Finish Your Presentation

• Instructions & Expectations: If you are not done with your presentation, finish.  If you are spend a few minutes practicing, and then you can do TinkerCAD, Instructables, Udemy for a few minutes 

AM Mechatronics: Entry Ticket - Finish Your Presentation Presentation Time Algorithms & Flow Charts  Solder Lab Clean Up

---

Presentation Time

• Instructions & Expectations: One at a time we are going to hear your presentation and then give feedback 
• Presentation Evaluation Form (PDF)

Algorithms & Flow Chart Lesson

• Assignment - Duration: 30-40 Min
• Link: Algorithms & Flow Charts
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed

Solder Lab (finish your 5-6 solder end 2 end joints)

• Assignment - Duration: 15 Min
• Link: TBD
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed
• Dig Deeper
• https://www.youtube.com/watch?v=Qps9woUGkvI
• https://www.youtube.com/watch?v=BLfXXRfRIzY
• https://www.youtube.com/watch?v=Q9G9gaokqvM

ROBOT Club

• Mostly today we are going to talk and plan

Clean Up

• Assignment - Duration: 10 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Wednesday August 29, 2018 - More Presentations, More Ohms and Solder

Entry Ticket - Finish Your Presentation

• Instructions & Expectations: If you are not done with your presentation, finish.  If you are spend a few minutes practicing, and then you can do TinkerCAD, Instructables, Udemy for a few minutes 

AM Mechatronics: Entry Ticket - Finish Your Presentation Presentation Time Finish Ohms Law  Solder Lab Clean Up

---

Presentation Time

• Instructions & Expectations: One at a time we are going to hear your presentation and then give feedback 
• Presentation Evaluation Form (PDF)

Ohm's Law Lesson

• Assignment - Duration: 30 Min
• Link: Ohms Law Introduction
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed

Solder Lab

• Assignment - Duration: 30-40 Min
• Link: TBD
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed
• Dig Deeper
• https://www.youtube.com/watch?v=Qps9woUGkvI
• https://www.youtube.com/watch?v=BLfXXRfRIzY
• https://www.youtube.com/watch?v=Q9G9gaokqvM

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Tuesday August 28, 2018 - Presentations and Solder...

Special Instructions

---

Entry Ticket - Finish Your Presentation

• Instructions & Expectations: If you are not done with your presentation, finish.  If you are spend a few minutes practicing, and then you can do TinkerCAD, Instructables, Udemy for a few minutes 

AM Mechatronics: Entry Ticket - Finish Your Presentation Presentation Time Solder Lab Clean Up

---

Presentation Time

• Instructions & Expectations: One at a time we are going to hear your presentation and then give feedback 
• Presentation Evaluation Form (PDF)

Solder Lab

• Assignment - Duration: 30-40 Min
• Link: TBD
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed
• Dig Deeper
• https://www.youtube.com/watch?v=Qps9woUGkvI
• https://www.youtube.com/watch?v=BLfXXRfRIzY
• https://www.youtube.com/watch?v=Q9G9gaokqvM

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Monday August 27, 2018 - Instructables

Special Instructions

---

Entry Ticket - Finish Your Class Pass

• Instructions & Expectations: Get your class pass card, attach your Name sticker to it, and put it on the board by the inside exit door

AM Mechatronics: Entry Ticket - Finish Your Class Pass Instructables Ohm's Law Finish Your Presentation Clean Up

---

Instructables

• Assignment - Duration: 10 Min
• Link: Introduction to Instructables
• Instructions & Expectations: Follow the instructions and signup for Instructables.com
• How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions. - 10 Points

Instructables Electronics Quiz Questions

• LAB - Duration: 15 Min
• Link: Instructables Electronics Class
• Instructions & Expectations: Read and Do Lesson 1.   What is the most important topics or concepts of this lesson? Create 3 multiple choice questions.
• How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions

Ohm's Law Lesson

• Assignment - Duration: 30 Min
• Link: Ohms Law Introduction
• Instructions & Expectations: It's a lecture, so probably take some notes
• How to Submit Assignment: Take Notes if needed

Google Applied Digital Skills (Presentation)

• LAB - Duration: 40-60 Min
• Presentation Link: Go To The Google Digital Skills Class
• Link to Class: https://applieddigitalskills.withgoogle.com/en/digital-training
• Instructions & Expectations: Go to the Google class link https://applieddigitalskills.withgoogle.com/en/digital-training and log in with your @metroed account.  do the lesson Technology's Role in Current Events.  Follow the instructions.  If you get stuck, please save any presentation work in your Google Drive in your @metroed.net account.
• How to Submit Assignment: Follow the Instruction in the lesson.  Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions  Save all your work

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Friday August 24, 2018 - Happy Friday... Hot Glue & Infinite Campus

Happy Friday... I will be working on the Blog Tabs this week end...

---

Entry Ticket - Hot Glue 

• Assignment - Duration: 15 Min
• Instructions & Expectations: Come make your bathroom pass... I'll have names on Monday

---

AM Mechatronics: Entry Ticket - Hot Glue your Bathroom Pass Setup and verify your Infinite Campus Account Printer Tear-down and Open Lab Clean Up

---

Infinite Campus

• Student Portal Link: http://svcte.org/IC
• Instructions & Expectations: You all should have received an Email with instructions to log in and setup your account.  Possibly with an "activation Code"  See Accessing Technology Slides

Google Applied Digital Skills

• LAB - Duration: 40-60 Min
• Presentation Link: Go To The Google Digital Skills Class
• Link to Class: https://applieddigitalskills.withgoogle.com/en/digital-training
• Instructions & Expectations: Go to the Google class link https://applieddigitalskills.withgoogle.com/en/digital-training and log in with your @metroed account.  do the lesson Technology's Role in Current Events.  Follow the instructions.  If you get stuck, please save any presentation work in your Google Drive in your @metroed.net account.
• How to Submit Assignment: Follow the Instruction in the lesson.  If you have issues, we will work them out on Tuesday.  Save all your work

Take Your Printer Apart - Try not to make too big of a mess!!

• LAB - Duration: 40-60 Min
• Instructions & Expectations: 
• Every One will have Safety Glasses... Please make sure Every one is using them
• Work on taking a printer apart.  The goal is to save any cool stuff.  Motor assemblies, Sensors, Switches, cool interfaces, boards and wires
• Don't strip the motors down to just the motor... keep it attached to the assemblies it attached to.  Keep any wires attached.
• You can work as a team of 2.  
• Virtually all the plastic will go in the trash can.  If it's cool and you want to keep it, save it and we can decide on Tuesday
• Any Metal not attached to something you are saving will go in the blue bins
• Any boards and wire you are not saving also goes in one of the blue bins
• How to Submit Assignment: Save cool stuff in your personal Class bin, or if it's too big, just set it on the table in the back.

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Thursday August 23, 2018 - Arduino's

Put the masking tape on your Notebook, and write your name and AM on it.

---

Entry Ticket - Arduino Udemy Class

• Assignment - Duration: 20 Min
• Link: Arduino Workshop 2018 | A step-by-step Arduino how-to guide 
• Instructions & Expectations: Start Listening to this class.  Over the next week or so we will complete all the lesson modules.  You will have Entry Ticket time or open lab to complete.
• How to Submit Assignment: in the future there will be some quiz's to access your learning.  Stay tuned

---

AM Mechatronics: Entry Ticket - Arduino Workshop Get your Arduino and Introduction Lecture Cisco C++ Sign up Clean Up

---

Arduino Introduction

• Lecture/Presentation/Lab - Duration: 40 Min
• Link: Arduino Introduction
• Instructions & Expectations: Listen and take notes in your Interactive Lab Book. If needed review the posted slide presentation

More Stuff, Like Maybe Sign Up for the Cisco C++ Class

Clean Up

• Assignment - Duration: 15 Min
• Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
• How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels: